News Center-洛阳轻捷润滑油科技有限公司—

qingjieshihua@163.com

400-999-6882

News

Company News

Industry News

Frequently Asked Questions

What are some common misconceptions about lubricant usage?

The oil level should ideally be maintained between the upper and lower markings on the dipstick. If there’s too much oil, it can leak into the combustion chamber through the clearance between the cylinder and the piston, where it will burn and form carbon deposits. These carbon deposits will accelerate wear on the cylinder and piston and speed up oil contamination.

2023

What are the possible reasons for the oil warning light to come on?

The oil warning light typically comes on due to insufficient oil pressure in the lubrication system. Common causes include the following: ⑴ The oil level in the oil pan is too low; check whether there are any leaks caused by poor sealing. ⑵ The engine oil has been diluted by fuel, or the engine is operating under excessive load at excessively high temperatures, causing the oil’s viscosity to decrease.

2023

The differences between emulsified oil and concentrate for hydraulic supports, and how to use emulsified oil for hydraulic supports.

Emulsified oil and concentrate for hydraulic supports are suitable as power transmission media for coal mines, single hydraulic props, hydraulic electric furnaces, and other similar systems. They can effectively protect hydraulic systems and extend their service life.

2022

Henan Lubricant Franchise—Common Industrial Lubricant Categories and Their Functions

There are more than a dozen types of industrial lubricants, categorized into various models, with hundreds of different formulations available. Many manufacturing companies’ customers often consult us, unsure about how to choose the right industrial lubricant. Next, let’s take a look at the common classifications and functions of industrial lubricants—franchising in Henan for lubricants.

2022

Henan Lubricant Oil Franchise—Lubricant Oil Production Processes and Methods

Industrial lubricating oils are widely used with various base oils, such as pure mineral oil, foam-inhibited synthetic hydrocarbon oils, polyether synthetic oils, alkylbenzene oils, and biodegradable oils. When these oils serve as industrial lubricants, they must not be mixed with each other. For example, when a polyether synthetic oil is mixed with other industrial oils, its performance will significantly deteriorate. Industrial lubricant additives vary depending on the specific application scenario. Outdoor hydraulic oils must be formulated to suit local temperature fluctuations and should never be used in enclosed indoor environments. Moreover, the requirements for heavy-duty gear oils differ from those for forming oils; heavy-duty gear oils contain extreme-pressure additives to ensure reliable performance even under harsh operating conditions.

2022

Henan Lubricant Franchise—Classification of Automotive Lubricant Grades

Generally, the labels on lubricants display the viscosity grades established by the Society of Automotive Engineers (SAE). This is a viscosity classification system that divides lubricants into three categories: summer high-temperature types, winter low-temperature types, and all-season types suitable for both winter and summer conditions. Specifically, there are 6 winter-grade oils, 4 summer-grade oils, and 16 all-season oils. Next, let’s take a look at the classification levels for automotive lubricants offered by Henan Lubricant Franchise—Lubricant Levels for Automobiles.

2022

Selection of Cutting Fluids, Classification of Oil-Based Cutting Fluids

Oil-based cutting fluids based on mineral oil are semi-synthetic oil-based cutting emulsions that also contain mineral oil. Cutting fluids containing chemically synthesized base oils, such as fully synthetic cutting fluids, on the other hand, contain only chemically synthesized base oils and no mineral oil.

2022

What are the basic principles of oil-based cutting fluids?

Oil-based cutting fluids are typically formulated using highly refined mineral oils and synthetic base oils, combined with a scientifically engineered blend of extreme-pressure additives, rust-inhibiting antioxidants, anti-fog agents, and other components. They can be adapted to various metalworking processes.

2022

Oil-based cutting fluid: How should cutting fluids be managed?

Oil-based cutting fluids can be stored for several years, whereas water-based cutting fluids can only be stored for 6 to 12 months. Cutting fluids should be stored indoors whenever possible, at a temperature between 5 and 40°C. If stored outdoors, avoid direct sunlight and exposure. In summer, outdoor temperatures in some regions can rise significantly, which is harmful to cutting fluids and may easily cause them to deteriorate. Additionally, it’s important to prevent rainwater from entering. Mixing rainwater with oil-based cutting fluids will reduce their lubricity and rust-preventive properties; mixing rainwater with water-based cutting fluids may lead to the separation or gelation of additives. The pour point of oil-based cutting fluids generally does not exceed -5°C, and the safety of water-based cutting fluids is typically guaranteed at temperatures as low as -5°C. Generally speaking, in southern regions...

2022

The two main functions of oily cutting fluids used in machining

Commonly used oil-based cutting fluids can be divided into two main categories: one is primarily a cooling water solution, and the other is mainly a lubricating oil. Water solutions that emphasize cooling are typically emulsions—similar to milk—as seen in factories. They are used in rough machining to enhance the effectiveness of cooling techniques, thereby improving machining efficiency and extending tool life. Oil-based cutting fluids that prioritize lubrication—such as those used in total-loss lubrication systems, kerosene, oleic acid, and rapeseed oil—are designed to improve lubrication performance, ensure the surface finish quality of machined materials, and reduce tool wear costs.

2022

< 1 2 3 4...13 >

Can't find the service you're looking for? Please contact us!

To inquire about our products, please leave us your email, and we’ll get back to you within 24 hours.

Phone:

400-999-6882

Email:

qingjieshihua@163.com

Business Address:

Room 1905, Quanshun 186 Office Building, Zhanlan Road, Luolong District, Luoyang City

Website Development: China Enterprise Dynamics Luoyang

Email：qingjieshihua@163.com

tel：400-999-6882

Sorry，当前栏目暂无内容!

Sorry，The current column has no content!